TagEdge 1000

Garmin Edge 1000 Software Updated to Version 12.20

Garmin Edge 1000

Garmin released Version 12.20 of its Edge 1000 bike computer software on April 11, 2017, shortly after releasing version 12.10. The release included a single fix.

Changes made from version 12.10 to 12.20:

  • Fixed an issue that could keep Garmin Express map downloads from working

Use Garmin Express to install the new version.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

Garmin Edge 1000 Software Updated to Version 12.10

Garmin Edge 1000

Garmin released Version 12.10 of its Edge 1000 bike computer software on March 29, 2017, shortly after releasing version 12.00. The release included a single fix.

Changes made from version 12.00 to 12.10:

  • Fixed minor issues related to Connect IQ

Use Garmin Express to install the new version.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

Garmin Edge 1000 Software Updated to Version 12.00

Garmin Edge 1000

Garmin released Version 12.00 of its Edge 1000 bike computer software on March 20, 2017. The release included a few fixes and a number of new features.

Changes made from version 11.20 to 12.00:

  • New Feature! Added support for Shimano Di2 Synchronized Shift. Graphical Gear data fields will now blink, an alert tone will be played, and a message banner will be displayed to indicate a chain ring shift is upcoming. Synchronized Shift mode can be changed and the alert tones can be disabled through the Shimano Di2 sensor settings
  • Added improvements for ANT+ bike lights. Added new Light Beam Activated and network Light Mode settings to ANT+ Bike Lights sensor settings. You can now configure your lights to turn On with a Timer Start by using the new Light Beam Activated setting and there is also a new Trail Light Mode
  • Added support for Connect IQ version 2.2.3
  • Fixed power zone settings not being retained
  • Fixed shutdowns during navigation
  • Fixed route calculation on special maps.

Use Garmin Express to install the new version.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

Garmin Edge 1000 Software Updated to Version 11.20

Garmin Edge 1000

Garmin released Version 11.20 of its Edge 1000 bike computer software on December 15, 2016. The release included a few fixes and a number of new features.

Changes made from version 10.00 to 11.20:

  • Improvements to Workout Data Screen
  • Fixed a bug to properly set target power when using the indoor trainer
  • New feature! Connect IQ 2.2 Support: Connect IQ Apps, Widgets and Data Fields can now communicate with ANT+ Power Meters and Bike Lights that are already connected to your Edge and can also now take advantage of ANT Burst mode. In addition, Apps and Widgets can take advantage of downloadable content and the new Intents system to create new and innovative experiences
  • New feature! Time in Zone data fields for Heart Rate and Power
  • Fixed an issue with the Turn Guidance Popup where the Map was not centering on the turn

Use Garmin Express to install the new version.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

Garmin Edge 1000 Software Updated to Version 10.00

Garmin Edge 1000

Garmin released Version 10.00 of its Edge 1000 bike computer software on October 13, 2016. The release included no fixes, but it did add four new features.

Changes made from version 9.20 to 10.00:

  • New feature! Added support for LiveTrack Auto Start
  • New feature! Added support for GroupTrack
  • Added Distance and Time Ahead/Behind as configurable data fields
  • Added Bike Lights options to Shimano Di2 remote controls. Now you can control ANT+ Bike Lights remotely with your Shimano Di2 Dura Ace shifters!

Use Garmin Express to install the new version.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

Garmin Edge 1000 Software Updated to Version 9.20

Garmin Edge 1000

Garmin released Version 9.20 of its Edge 1000 bike computer software on September, 2016. Three fixes and two improvements were added in this release.

Changes made from version 9.10 to 9.20:

  • Fixed several issues and made improvements for Varia Vision
  • Fixed several issues and made improvements for Connect IQ
  • Fixed an issue uploading activities over Wi-Fi
  • Made improvements to the software update page
  • Added mixed surface ride type.

Use Garmin Express to install the new version.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

Garmin Edge 1000 Software Updated to Version 9.10

Garmin Edge 1000

Garmin released Version 9.10 of its Edge 1000 bike computer software on August 15, 2016. The two new fixes only apply to the Connect IQ application.

Changes made from version 9.00 to 9.10:

  • Fixed an issue with syncing Connect IQ settings.
  • Fixed issue where activities using Connect IQ data fields could be corrupted.

Garmin states that this update will require you to pair your Edge and phone after the update.

Use Garmin Express to install the new version.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

Garmin Edge 1000 Software Updated to Version 8.30

Garmin Edge 1000

Garmin released Version 8.30 of its Edge 1000 bike computer software on June 6, 2016.

Changes made from version 8.10 to 8.30:

  • New feature! Added the ability to set an activity’s Ride Type. Garmin Connect will show this setting in each ride’s Activity Type. You can modify the default setting for each Activity Profile and also manually override this value on the save/discard page for each ride. Please note that the following Ride Type settings are not yet supported on Garmin Connect, but will be added in the upcoming weeks: Commuting, eBike, and eMountain.
  • Fixed issue where an extra activity profile is created when importing settings from WKO4
  • Added support for two new data fields on the Varia Vision: Gear Battery and Gear Combo
  • Fixed issue where CIQ data fields could cause sensor dropouts
  • Improved experience with Bontrager lights
  • Fixed issue where FTP could be corrupted, which caused TSS and IF metrics to not be recorded
  • Fixed issues with gear shifting data

Use Garmin Express to install the new version.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

Garmin Edge 1000 Firmware Version 2.80 Is Available

Garmin Edge 1000It looks like Garmin updated the firmware to the GarminĀ Edge 1000 cycling computer yesterday to version 2.80. Garmin Express is the software required to update the Edge 1000. Changes made from version 2.70 to 2.80 include:

  • Fixed an issue causing automatic upload failures with the Garmin Connect Mobile app on Android
  • Fixed an issue causing manual upload failures with the Garmin Connect Mobile app on both Android and iPhone platforms

The entire list of fixes and change history are available here.

Email this to someoneTweet about this on TwitterShare on LinkedInPin on PinterestShare on Google+Share on FacebookPrint this page

© 2017 Technoleros

Theme by Anders NorénUp ↑